Our Products

Search our other products!

Filter

Cool Products

Electrical

HVAC

Plumbing

Home

Products

All Products

WD-6X NEW

WD-6X WALL DRAIN/SCUPPER FLASHING PANEL

Fits 6" X 6"

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 24)

MSRP US $7.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

JF 4X - "Joist Flashing"

JF4X- Cantilevered Joist Flashing

One piece weatherproof saddle flashing for: Decks, porches, entrance roofs, etc.

Cut to fit 4"X 4", 6", 8", 10" or 12" dimensional Joist

13 1/2 " x 6 5/8" x 2"

MSRP US $3.25 plus S & H

Reduces liability
Sheds water away from intersection
Helps to prevent air leakage
Economical — saves time and labor
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

JF-2X - "Joist Flashing"

JF-2X- Cantilereved Joist Flashing

One piece weatherproof saddle flashing for: Decks, porches, entrance roofs, etc.

Cut to fit 2" X 4", 6", 8", 10" or 12" dimensional Joist

13 1/2 " x 4 1/2" x 2"

MSRP US $3.25 plus S & H

FT - "Flashing Tool"

FT- Flashing Tool

For installing Flashing Tape, and Seam Tapes

4" blade with a Straight edge for running along window and door edges

Round corner for inside corner details

Better than a J-Roller

MSRP US $6.25 plus S & H

Allows Installer to place necessary pressure on tapes
Rounded corner for inside corners
Straight edge to run along window frame
Economical — saves time and labor
Fits in tool pouch or back pocket
Non-corrosive and non-conductive

LF - "Lightning Flash Outside Corner"

LF-Outside Corner Flashing

One piece weatherproof Flashing Corners for builders that need cost effective window pans under their windows. These corners have been designed with vinyl and aluminum windows in mind.

MSRP US $2.25 plus S & H

Reduces liability
Economical — saves time and labor
Non-corrosive — non-conductive
Easy to integrate with building envelope

XLFXLA - "Lightning Flash XL Outside Corner"

LFXLA-Outside Corner Flashing

Lightning Flash XL Corners are a heavy duty & LARGER flashing corner design.

They are designed for any type of recessed wall condition or transitional flashing application.

Can also be used with inside corner for pot shelfs and recessed windowsl

4" X 4" X 4"

MSRP US $2.50 plus S & H

Reduces liability
Economical — saves time and labor
Non-corrosive — non-conductive
Easy to integrate with building envelope

XLFXLB - "Lightning Flash XL Inside Corner"

LFXLA-Inside Corner Flashing

Lightning Flash XL Corners are a heavy duty & LARGER flashing corner design.

They are designed for any type of recessed wall condition or transitional flashing application.

Can also be used with outside corner for pot shelfs and recessed windows.

4" X 4" X 4"

MSRP US $2.50 plus S & H

Reduces liability
Economical — saves time and labor
Non-corrosive — non-conductive
Easy to integrate with building envelope

HVTK - NEW

HVTK HVAC FLASHING PANEL

Fits 2" or 3" PVC for Horizontal Vent Termination Kits

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 24)

MSRP US $7.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

A/C U-C "Universal Curved"

A/C LINE SET FLASHING PANEL

Fits Line Sets with 1 1/2" - 2 3/4 " Insulation Tubing

(sold in boxes of 1 or 4 only)

RubberSeal

RubberSeal Inside

MSRP US $17.95

Reduces liability
Aids in controlling air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

A/C U-S "Universal Squared"

A/C LINE SET FLASHING PANEL

Fits Line Sets with 1 1/2" - 3 1/2 " Insulation Tubing

(sold in boxes of 2 or 4 only)

Tear-out Rubber Seal Inside

MSRP US $17.95

Download AutoCAD in .PDF format

A/C U-B "Universal Brick and Cultured Stone"

A/C U-B A/C LINE SET FLASHING PANEL

Fits Line Sets with1 1/2" to 3 1/2" -" Insulation Tubing

(sold in boxes of 2 or 4 only)

Tear-out Rubber Seal Inside

MSRP US $17.95

Reduces liability
Aids in controlling air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

P-200

P-200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 2" to 2 1/2" sized pipes - copper, rigid, PVC and ABS. Also fits 3" Single Wall Sheet Metal Duct for HVAC applications.

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-300

P-300 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 3" Copper, rigid , PVC and ABS sized pipe and 4" Single Wall Sheet Metal Duct

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-400

P-400 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 4" ABS sized pipe and 5" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-600

P-600 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 6" sized pipes- copper, rigid, PVC, ABS and 6" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-800 "Available Now"

P-800 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 8" sized pipes- copper, rigid, PVC, ABS and 7", 8 " or 9" Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $7.25

P-1000 "Available Now"

P-1000 PLUMBING, GAS & HVAC FLASHING PANEL

Fits10" sized pipes- copper, rigid, PVC, ABS and 10" and 11" Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25

P-1200 "Available Now"

P-1200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits12" sized pipes- copper, rigid, PVC, ABS and 12 Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25

DBL-50 NEW

DBL-50 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1/2" to 3/4" sized pipes - with 2 holes spaced 4" on center for tankless water heater, copper, rigid, PEX, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 24 only)

MSRP US $6.25 plus S & H

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

P-25

P-25 PLUMBING FLASHING PANEL

Fits 1/8" to 3/8" sized pipes - copper, rigid, and PVC

NOTE: also used with low voltage electrical

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

P-50 GW

P-50 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1/2" to 3/4" sized pipes - copper, rigid, and PVC with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-100

P-100 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1" to 1-1/4" sized pipes - copper, rigid, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-100 GW

P-100 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1" to 1-1/4" sized pipes - copper, rigid, and PVC with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-150

P-150 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1 1/2" to 1 3/4" sized pipes - copper, rigid, PVC and ABS

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-150 GW

P-150 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1 1/2" to 1 3/4" sized pipes - copper, rigid, PVC and ABS with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-200

P-200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 2" to 2 1/2" sized pipes - copper, rigid, PVC and ABS. Also fits 3" Single Wall Sheet Metal Duct for HVAC applications.

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

P-200 GW

P-200 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 2" to 2 1/2" sized pipes - copper, rigid, PVC and ABS with separate Ground Wire.

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-300

P-300 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 3" Copper, rigid , PVC and ABS sized pipe and 4" Single Wall Sheet Metal Duct

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

P-400

P-400 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 4" Copper, rigid , PVC and ABS sized pipe and 5" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

P-600

P-600 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 6" sized pipes- copper, rigid, PVC, ABS and 6" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25

P-800 "Available Now "

P-800 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 8" sized pipes- copper, rigid, PVC, ABS and 8 " Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $7.25

P-1000 "Available Now"

P-1000 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 10" sized pipes- copper, rigid, PVC, ABS and 10" Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25

P-1200 "Available Now "

P-1200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits12" sized pipes- copper, rigid, PVC, ABS and 12 Single Wall Sheet Metal Duct

18 1/2" x 184 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25

P-2PS

P-2PS PLUMBING, GAS & HVAC FLASHING PANEL

Two piece system. Used on copper pipes with exterior T's sweated on.

Cut out center to fit around 1/2" to 2" sized copper pipes.

IMPORTANT: Caulking is Required to Make Seal at Pipe to Panel

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-AIB NEW

E-AIB ELECTRICAL ARLINGTON INBOX™ FLASHING PANEL

Fits on Arlington InBox™

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

E-LV NEW

E-LV ELECTRICAL LOW VOLTAGE FLASHING PANEL

Fits Low Voltage rounded wire, Coaxial Cable

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

E-DGB-C 1 3/8" NEW

E-DGB-C 1 3/8" ELECTRICAL DUAL GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Carlon Adjustable Dual Gang Box Part #B234ADJ Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25

E-SGB-A 1 3/8"

E-SGB-A 1 3/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Allied Moulded Electrical Single Gang Box (part # 9327-N ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-SGB-C 1 3/8"

E-SGB-C 1 3/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-3/0 B-A 1 3/8"

E-3/0 B-A 1 3/8" ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Allied Moulded 3" Round Electrical Boxes (part #'s 9335-HNK,9335-HNGK ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-DGB-C 7/8" NEW

E-DGB-C 7/8" ELECTRICAL DUAL GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications. .

Fits Carlon Adjustable Dual Gang Box Part #B234ADJ Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25

E-SGB-A 7/8"

E-SGB-A 7/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Allied Moulded Electrical Single Gang Box (part # 9327-N ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-SGB-C 7/8"

E-SGB-C 7/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-3/0 B-A 7/8"

E-3/0 B-A 7/8" ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Allied Moulded Electrical Single Gang Boxes (part #'s 9335-HNK,9335-HNGK ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-SGB

E-SGB ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Single Gang Plastic Boxes Only.

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-SGB-C 5/8"

E-SGB-C 5/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-3/0 B

E-3/0 B ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical 3/0 Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-4/0 B

E-4/0 B ELECTRICAL 4/0 BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical 4/0 Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-PC 3/0

E-PC 3/0 ELECTRICAL PANCAKE 3/0 BOX FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Pancake 3/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-PC 4/0

E-PC 4/0 ELECTRICAL PANCAKE 4/0 BOX FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Pancake 4/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-4/0SB

E-4/0SB ELECTRICAL 4/0 STEEL BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Specified Electrical 4/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

P-50

P-50 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1/2" to 3/4" sized pipes - copper, rigid, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)

E-SGR

E-SGR ELECTRICAL SINGLE GANG 1/2" RAISED PLASTER RING COVER FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding. For Plastic "P" or "Mud" rings.

Fits Specified Electrical Single Gang Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Reduces liability
Stops air leakage
Helps to prevent water intrusion
Economical — saves time and labor
Eliminates the need for sealants
Non-corrosive — non-conductive
Only flashing that is specifically designed for wall penetrations
Self sealing around fasteners
Easy to integrate with building envelope and works with all cladding systems
PLUS A 10 YEAR LIMITED WARRANTY!!!

Download AutoCAD in .PDF format

Download AutoCAD in .DXF format (.ZIP Download)