Sort by: All |  Electrical |  Plumbing |  HVAC |  Cool Products

Warning: All Quickflash® products maximum heat threshold is 160 °F. Quickflash® products are combustible and should be protected from flame and other high heat.

Download Electrical Cross Reference Sheet

 

DBL-50 NEW

 

DBL-50 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1/2" to 3/4" sized pipes - with 2 holes spaced 4" on center for tankless water heater, copper, rigid, PEX, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 24 only)

MSRP US $6.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

WD-6X NEW

WD6X

WD-6X  WALL DRAIN/SCUPPER FLASHING PANEL

Fits 6" X 6"

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 24)

MSRP US $7.25

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

HVTK- NEW

HVTK

HVTK HVAC FLASHING PANEL

Fits New 2" or 3" PVC for Horizotal Vent Termination Kits

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 24)

MSRP US $7.25

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

JF 4X - "Joist Flashing"

JF 4X- Cantilevered Joist Flashing

One piece weatherproof saddle flashing for: Decks, porches, entrance roofs, etc.

Cut to fit 4"X 4", 6", 8", 10" or 12" dimensional Joist

13 1/2 " x 6 5/8" x 2"

MSRP US $3.25 plus S & H

  • Reduces liability
  • Sheds water away from intersection
  • Helps to prevent air leakage
  • Economical — saves time and labor
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

JF 2X - "Joist Flashing"

JF 2X- Cantilevered Joist Flashing

One piece weatherproof saddle flashing for: Decks, porches, entrance roofs, etc.

Cut to fit 2" X 4", 6", 8", 10" or 12" dimensional Joist

13 1/2 " x 4 1/2" x 2"

MSRP US $3.25 plus S & H

  • Reduces liability
  • Sheds water away from intersection
  • Helps to prevent air leakage
  • Economical — saves time and labor
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

FT - "Flashing Tool"

FT- Flashing Tool

For installing Flashing Tape, and Seam Tapes

 

4" blade with a Straight edge for running along window and door edges

Round corner for inside corner details

Better than a J-Roller

MSRP US $6.25 plus S & H

  • Allows Installer to place necessary pressure on tapes
  • Rounded corner for inside corners
  • Straight edge to run along widnow frame
  • Economical — saves time and labor
  • Fits in tool pouch or back pocket
  • Non-corrosive and non-conductive

E-LV or P-25

P-50

E-LV or P-25 PLUMBING FLASHING PANEL

Fits Low Voltage rounded wire, coaxial cable, or 1/8" to 3/8" sized pipes - copper, rigid, and PVC

 

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

A/C U-C "Universal Curved"

A/C 150

A/C LINE SET FLASHING PANEL

Fits Line Sets with 1 1/2" - 2 3/4 " Insulation Tubing

(sold in boxes of 1 or 4 only)

Rubber Seal Inside

MSRP US $17.95 plus S & H

Download AutoCAD in .PDF /> Download AutoCAD in .DXF
  • Reduces liability
  • Aids in controlling air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

A/C U-S "Universal Squared"

A/C 150

A/C LINE SET FLASHING PANEL

Fits Line Sets with 1 1/2" - 3 1/2 " Insulation Tubing

(sold in boxes of 2 or 4 only)

Tear-out Rubber Seal Inside

MSRP US $17.95 plus S & H

Download AutoCAD in .PDF />
  • Reduces liability
  • Aids in controlling air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

A/C U-B "Universal Brick and Cultured Stone"

A/C 150

A/C U-B A/C LINE SET FLASHING PANEL

Fits Line Sets with1 1/2" to 3 1/2" -" Insulation Tubing

(sold in boxes of 2 or 4 only)

Tear-out Rubber Seal Inside

MSRP US $17.95 plus S & H

Download AutoCAD in .PDF />
  • Reduces liability
  • Aids in controlling air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-AIB NEW

E-AIB

E-AIB ELECTRICAL ARLINGTON INBOX™ FLASHING PANEL

Fits on Arlington InBox™

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-DGB-C 1 3/8" NEW

E-SGB-A

E-DGB-C 1 3/8" ELECTRICAL DUAL GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Carlon Adjustable Dual Gang Box Part #B234ADJ Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB-A 1 3/8"

E-SGB-A

E-SGB-A 1 3/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Allied Moulded Electrical Single Gang Box (part # 9327-N ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB-C 1 3/8"

E-SGB-C

E-SGB-C 1 3/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-3/0 B-A 1 3/8"

E-3/0 B-A

E-3/0 B-A 1 3/8" ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Allied Moulded 3" Round Electrical Boxes (part #'s 9335-HNK,9335-HNGK ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-DGB-C 7/8" NEW

E-SGB-A

E-DGB-C 7/8" ELECTRICAL DUAL GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications. .

Fits Carlon Adjustable Dual Gang Box Part #B234ADJ Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB-A 7/8"

E-SGB-A

E-SGB-A 7/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Allied Moulded Electrical Single Gang Box (part # 9327-N ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB-C 7/8"

E-SGB-C

E-SGB-C 7/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-3/0 B-A 7/8"

E-3/0 B-A

E-3/0 B-A 7/8" ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 3-Coat Stucco & Lap Siding with Rain Screen or Furring Strip Applications.

Fits Allied Moulded Electrical Single Gang Boxes (part #'s 9335-HNK,9335-HNGK ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB

E-SGB

E-SGB ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Single Gang Plastic Boxes Only.

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGB-C 5/8"

E-SGB-C

E-SGB-C 5/8" ELECTRICAL SINGLE GANG BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Carlon Adjustable Electrical Single Gang Box (part # B121ADJ ONLY)

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-3/0 B

E-3/0 B

E-3/0 B ELECTRICAL 3/0 BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical 3/0 Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-4/0 B

E-4/0 B

E-4/0 B ELECTRICAL 4/0 BOX FLASHING PANEL

Used on 5/8" Depth 3-Coat Stucco and Lap Siding.

Fits Specified Electrical 4/0 Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-PC 3/0

E-PC 3/0

E-PC 3/0 ELECTRICAL PANCAKE 3/0 BOX FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Pancake 3/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-PC 4/0

E-PC 4/0

E-PC 4/0 ELECTRICAL PANCAKE 4/0 BOX FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding.

Fits Specified Electrical Pancake 4/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-4/0SB

E-4/0SB

E-4/0SB ELECTRICAL 4/0 STEEL BOX FLASHING PANEL

Used on 1-Coat Stucco & EIFS Systems.

Fits Specified Electrical 4/0 Metal Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

E-SGR

E-SGR

E-SGR ELECTRICAL SINGLE GANG 1/2" RAISED PLASTER RING COVER FLASHING PANEL

Used on 3-Coat Stucco and Lap Siding. For Plastic "P" or "Mud" rings.

Fits Specified Electrical Single Gang Plastic Boxes Only

IMPORTANT: See Quickflash's Electrical Cross Reference Sheet for Box Compatibility CLICK HERE

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-50

P-50

P-50 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1/2" to 3/4" sized pipes - copper, rigid, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-50 GW

P-50

P-50 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1/2" to 3/4" sized pipes - copper, rigid, and PVC with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-100

P-100

P-100 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1" to 1-1/4" sized pipes - copper, rigid, and PVC

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-100 GW

P-100

P-100 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1" to 1-1/4" sized pipes - copper, rigid, and PVC with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-150

P-150

P-150 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 1 1/2" to 1 3/4" sized pipes - copper, rigid, PVC and ABS

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-150 GW

P-150

P-150 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 1 1/2" to 1 3/4" sized pipes - copper, rigid, PVC and ABS with separate Ground Wire

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-200

P-200

P-200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 2" to 2 1/2" sized pipes - copper, rigid, PVC and ABS. Also fits 3" Single Wall Sheet Metal Duct for HVAC applications.

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-200 GW

P-200

P-200 GW PLUMBING, GAS & HVAC FLASHING PANEL w/ Ground Wire

Fits 2" to 2 1/2" sized pipes - copper, rigid, PVC and ABS with separate Ground Wire.

NOTE: also used with electrical pipes through brick and stone veneers

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-300

P-300

P-300 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 3" Copper, rigid , PVC and ABS sized pipe and 4" Single Wall Sheet Metal Duct

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 or 24 only)

MSRP US $6.25

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-400

P-400

P-400 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 4" Copper, rigid , PVC and ABS sized pipe and 5" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-600

P-600

P-600 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 6" sized pipes- copper, rigid, PVC, ABS and 6" Single Wall Sheet Metal Duct

12 1/2" x 12 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-800 "Available Now "

P-800

P-800 PLUMBING, GAS & HVAC FLASHING PANEL

Fits 8" sized pipes- copper, rigid, PVC, ABS and 7", 8 " or 9" Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12 and 24)

MSRP US $7.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-1000 "Available Now "

P-1000

P-1000 PLUMBING, GAS & HVAC FLASHING PANEL

Fits10" sized pipes- copper, rigid, PVC, ABS and 10" Single Wall Sheet Metal Duct

18 1/2" x 18 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-1200 "Available Now "

P-1200
right

P-1200 PLUMBING, GAS & HVAC FLASHING PANEL

Fits12" sized pipes- copper, rigid, PVC, ABS and 12 Single Wall Sheet Metal Duct

18 1/2" x 184 1/2" x 3/32" (sold in boxes of 12)

MSRP US $7.25 plus S & H

  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!

P-2PS

P-2PS

P-2PS PLUMBING, GAS & HVAC FLASHING PANEL

Two piece system. Used on copper pipes with exterior T's sweated on.

Cut out center to fit around 1/2" to 2" sized copper pipes.

IMPORTANT: Caulking is Required to Make Seal at Pipe to Panel

11 1/8" x 11 1/8" x 3/32" (sold in boxes of 12 only)

MSRP US $6.25 plus S & H

Download AutoCAD in .PDF Download AutoCAD in .DXF
  • Reduces liability
  • Stops air leakage
  • Helps to prevent water intrusion
  • Economical — saves time and labor
  • Eliminates the need for sealants
  • Non-corrosive — non-conductive
  • Only flashing that is specifically designed for wall penetrations
  • Self sealing around fasteners
  • Easy to integrate with building envelope and works with all cladding systems
  • PLUS A 10 YEAR LIMITED WARRANTY!!!